A1/A2 Type Cable Glands

Type	A1A2
Design Specification	BS EN 6121: Part-1, IEC 62444:2010, BS EN 62444:2010
Gland Sizes	16mm - 90mm
Application	Suitable for Indoor & Outdoor. Provides seal on cable outer sheath and mechanical cable retention.
Ingress Protection	IP66
Gland Material	Brass (CuZn39Pb3 / IS319)
Operating Temperature	Rubber Washer	Temperature Range
	If Natural	-5°C to +60°C
	If Neoprene	-5°C to +90°C
	If Silicon	-10°C to +175°C
Finish	Natural Brass or Nickel Plated
Cable Types	Unarmoured
Accessories	Lock Nut, Earth Tag & Shrouds, Serrated Washer, Adaptor / Reducer.

Cable Gland Type	Max Overall Cable Diameter (B)		Gland Dimensions
	Min dia. (mm)	Max dia. (mm)	ISO Entry Thread		Approx Length from Shoulder (F)	Hexagon Size
	Min dia. (mm)	Max dia. (mm)	ISO Entry Thread Diameter (D)	ISO Entry Thread Length (E)	Approx Length from Shoulder (F)	Across Flat (G mm)	Across Corner (H mm)
A1A2-16S	3.5	6.5	16	10	20	22	24.5
A1A2-16L	4	8	16	10	20	22	24.5
A1A2-20S	8.5	12	20	15	22	24	26
A1A2-20L	8	13	20	15	22	26	29
A1A2-25S	9	17.5	25	15	25	30	33
A1A2-25L	12	21	25	15	26	33.5	37
A1A2-32S	18	25	32	15	30	41	45.5
A1A2-32L	18.5	26.2	32	15	30	41	45.5
A1A2-40S	20	31	40	15	31	50	55.5
A1A2-40L	23	33	40	15	31	50	55.5
A1A2-50S	31	38	50	15	33	55	60.5
A1A2-50L	35	44.1	50	15	33	59.5	67
A1A2-63S	39	49.3	63	15	35	70	77
A1A2-63L	46	53.5	63	15	35	74	80
A1A2-75S	53	61.5	75	15	35	82	90.5
A1A2-75L	60	67.4	75	15	40	84	94
A1A2-90S	64	72.8	90	20	50	101	114
A1A2-90L	68	78	90	20	50	101	114

Your email address will not be published. Required fields are marked *